Different lights are required for different work signals in the aircraft. Thus 9 types of lights are fitted in the airplane for different work and direction. Each of the lights in the airplane has a different significance. People often ask why so many lights are installed when the airplane receives a signal from the control room. Here's a look at each of the airplane's lights to end your curiosity. So find out why 9 types of lights come in airplanes.
■ Taxi Light:
This taxi light is used when the airplane is moving on the ground. This 150 volt light helps the airplane see the runway. The pilot turns on the taxi light when the flight gets taxi clearance. So that the lights on the runway turn on and help the pilot.
■ Take off light:
Take off light along with taxi light. Take-off lights are brighter than taxi lights. These lights are turned on at take-off time and emit more light than taxi lights. These lights are ready for airplane takeoff when turned on.
■ Runway turn off light:
Apart from take off and taxi light, there is also a light which has a wider angle. Turning on these lights helps the pilot to see the road properly on the runway.
■ Wing Scan Light:
Since the wings of an airplane are mainly separated from the body, its protection is very important. For which wing lights are installed so that the airplane can be clearly seen even in the dark at the time of take off, when the airplane exits through the clouds. With the help of those wing lights, it is possible to see if snow has accumulated on the wings.
■ Anti-collagen beacons:
These lights help crews clean or oversee airplanes on the ground. These lights are orange in color, which are turned on before the engine starts before the airplane and off after the engine is turned off. So the crew realizes that the airplane has stopped.
■ Landing lights:
These lights are white in color, which helps to see the sky and runway properly while landing. These lights are sometimes placed under the wings, on the outer surface of the wings and sometimes in other places. Many airplanes have more than one landing light.
■ Navigation Lights:
These lights help to determine the direction of the airplane after the airplane is turned on, 4 lights are installed for navigation. The pilot has a green light, the other has a red light and the end of the airplane has a white light. Depending on the position of the light, it is easy to understand which direction the oncoming airplane is heading for the pilot of the other airplane.
■ High Intensity Strobe Lights:
These lights help make airplanes more visually appealing. These lights are below the red and green navigation lights. These lights are brighter so that they can attract the attention of the people around them during the flight.
■ Logo Light:
Each airplane has a company logo. Which this light highlights. There are two benefits to this light. Which company owns the airplane, is realized and the company is also promoted.
0 Comments